- Spartan AR550 Level III+ Cyclone Light Weight Sentry Plate Carrier Package

This Body Armor Package Includes:

  • Set of Two 10x12 AR550 Body Armor Single Curve, Full Coat
  • One Spartan Armor Systems Cyclone Light Weight Sentry Plate Carrer (Black MultiCam)

AR550 Level III+ Body Armor Certified Plates and Spartan Cyclone Light Weight Sentry Plate Carrier Package

Package includes both front and back AR550 shooters cut steel armor plates with a single curve and base coat, and Spartan Sentinel Plate Carrier.

Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates. 

nij-cert-listed2.jpg

We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor!  With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated!

Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our  ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.

Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!

Chest Plate Weight (per plate):   10x12 AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz.

Thickness:   .25″ AR550 plus approximately .25″ coating (full coat) makes this slim profile plate overall .5-.6″ in total thickness

As with all of our Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our “FAQ” to find out more about the AR550 Armor we use to construct our body armor!

 

Spartan Armor Systems Cyclone Light Weight Sentry Plate Carrier

 Fits Spartan Armor Systems 10"x12" AR500 Omega™/AR550/Armaply Shooter's Cut armor plates, SAS Level IIIA, III Armor, and our Level IV composites

 

The Condor Cyclone Plate Carrier is designed for first responders to carry plates. The Cyclone accepts up to 10.25” x 13.25" plates via easy access pull down flaps. The Cyclone also features padded shoulders and adjustable cummerbund for added comfort. Heavyweight MOLLE on the front and back along with hook and loop MOLLE provide lots of space on the vest for modular attachments and patches. Made in the USA.
Specifications
  • Available in genuine Crye-Precision™ MultiCam Black®
  • Hook and loop webbing
  • Heavyweight webbing for modular attachments
  • Front map pocket with snap, hook and loop closure
  • Adjustable cummerbund with soft armor pockets
    • Accepts Medium 6" x 10" soft armor
  • Easy access plate pockets
  • Adjustable girth and height
  • Made In U.S.A.
Size Waist Size: 30"- 50" adjustable sizing
Accepts Medium or Large ESAPI plates up to 10.25" x 13.25"
Color MultiCam Black®, 
Notifications Does not fit with Spartan Armor side plates

- Spartan AR550 Level III+ Cyclone Light Weight Sentry Plate Carrier Package

$ 402.00
- Spartan AR550 Level III+ Cyclone Light Weight Sentry Plate Carrier Package

- Spartan AR550 Level III+ Cyclone Light Weight Sentry Plate Carrier Package

$ 402.00
$ 402.00

This Body Armor Package Includes:

  • Set of Two 10x12 AR550 Body Armor Single Curve, Full Coat
  • One Spartan Armor Systems Cyclone Light Weight Sentry Plate Carrer (Black MultiCam)

AR550 Level III+ Body Armor Certified Plates and Spartan Cyclone Light Weight Sentry Plate Carrier Package

Package includes both front and back AR550 shooters cut steel armor plates with a single curve and base coat, and Spartan Sentinel Plate Carrier.

Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates. 

nij-cert-listed2.jpg

We’ve taken our Level III Body Armor to a NEW level! Spartan Armor Systems™ is pleased to introduce our AR550 Body Armor!  With a 10% increase in ballistic core hardness, our level III+ AR550 armor defeats higher velocity threats such as XM193, M855, and M80! We’re special rifle threat validated!

Our AR550 armor hits the “sweet spot” in the Brinnell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found our  ballistically rated variant of AR550 that we use is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.

Our AR550 Level III+ armor has our GEN2 lower cut radius. With a 10% increase in core hardness, this ballistic grade steel is much harder than AR500, but not too hard to cause severe stress while forming. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109 and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!

Chest Plate Weight (per plate):   10x12 AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz.

Thickness:   .25″ AR550 plus approximately .25″ coating (full coat) makes this slim profile plate overall .5-.6″ in total thickness

As with all of our Armor products, we only use the highest grade of AR550 to manufacture our armor! Remember, not all body armor is created equal! Read our “FAQ” to find out more about the AR550 Armor we use to construct our body armor!

 

Spartan Armor Systems Cyclone Light Weight Sentry Plate Carrier

 Fits Spartan Armor Systems 10"x12" AR500 Omega™/AR550/Armaply Shooter's Cut armor plates, SAS Level IIIA, III Armor, and our Level IV composites

 

The Condor Cyclone Plate Carrier is designed for first responders to carry plates. The Cyclone accepts up to 10.25” x 13.25" plates via easy access pull down flaps. The Cyclone also features padded shoulders and adjustable cummerbund for added comfort. Heavyweight MOLLE on the front and back along with hook and loop MOLLE provide lots of space on the vest for modular attachments and patches. Made in the USA.
Specifications
  • Available in genuine Crye-Precision™ MultiCam Black®
  • Hook and loop webbing
  • Heavyweight webbing for modular attachments
  • Front map pocket with snap, hook and loop closure
  • Adjustable cummerbund with soft armor pockets
    • Accepts Medium 6" x 10" soft armor
  • Easy access plate pockets
  • Adjustable girth and height
  • Made In U.S.A.
Size Waist Size: 30"- 50" adjustable sizing
Accepts Medium or Large ESAPI plates up to 10.25" x 13.25"
Color MultiCam Black®, 
Notifications Does not fit with Spartan Armor side plates